"We will not be undersold"
 

 

Call For Pricing

Open 7 days a week

Toll Free 800-481-4114












Browse Manufacturers






Browse Categories
| ---> Power








A and A Scales LLC
78 North 12th Street
Prospect Park NJ 07508

Toll Free: 800-481-4114
Local: (973) 800-3965
Fax: (509) 355-3498

Click here to send an e-mail
  You are here: Home » Components » Power » LCP 4 & 6 Wire Power Part
Transient Load Cell Protector
 
Transient Load Cell Protector
This protector will stop electrical transients such as spikes, surges and noise from damaging strain gage load cells. Excitation voltage can be 18 VDC or +/-9 VDC or 9 VAC. This unit will clamp the excitation voltage to 20 VDC between + and - excitation terminals, 75 VDC between any terminal and earth ground. Three active protection stages on each of four lines. One active protection stage on the shield. Response time on 20 VDC stage is 5 nanoseconds. Response time on 75 VDC stage is 100 nanoseconds. Resistance to ground is 7500 megohms minimum. Grounding is through a 1/4" lug to a 20 ft insulated #10 AWG ground wire(included). Two nylon strain reliefs for 0.187"-0.312" dia cable. Chemically resistant PVC enclosure is gasketed NEMA 1,2,3 and 11 intended for indoor and outdoor service. It is not NEMA 4 (washdown) or NEMA 6 (submersion).

Call for prices on other enclosures.

4"W x 4"D x 2.5"H, 1.4 lb.

 Part Number   Description   Stock   Weight 
LCP-1  Load cell transient protector 4 wire   1957   2.00 
LCP-2  Load cell transient protector 6 wire   1752   2.00 
Result Pages:  1